Press Releases

Power Sensor Calibration
PCS-50
PS-Cal Software
Customer Feedback
Supported Sensors

CLS and Agilent
Procedures
Multimeter Procedures

Fluke MET/CAL® Support
CLS and MET/CAL
Procedure List
Revision Control

MUDCATS^TM Support
CLS and MUDCATS
DataSheets
Fluke Meter Pack

Web Solutions
Calibration Asset Tracking
MUDCATS - Web Access

FreeStuff
Cal Lab Solutions Downloads

Employment
Positions Available

Support for Agilent Multimeters

We currently offer fixed pricing for MET/CAL® 7.1 procedures
on the following models:

• Agilent U1241A/U1242A
• Agilent U1251A/U1252A
• Agilent 34410A/34411A

Pricing is based on a single-site license for these MET/CAL® 7.1 based verification & adjustment procedures. There is no limit on the number of calibrations per license. These procedures are "off-the-shelf," written to Agilent's written procedures and recommended standards. Additional configurations are available for an added cost--please contact us for a quote.

Click here to download an order form and view pricing.

FAQ's:

How soon can I expect delivery?

Turn around time for electronic delivery (via e-mail) is 24 hours; 3-7 days for a mailed copy. Please allow a 2-week turnaround time for the High Production Jigs.

What standards are used for the U124xA and U125xA procedures?

As found in Agilent's User's and Service Guides, the U124xA and U1251A use the Fluke 5520A. The U1252A uses the Fluke 5520A, Agilent 33250A, 53131A and 34401A.

What standards are used for the 34410A/34411A procedure?

As found in Agilent's Service Guide, the 34410A/34411A uses the Agilent 34172A, 33220A and Fluke 5720A.

How do I mount my U124xA in place during calibration?

There is no way to hold the optical connector in place on the back of the unit, requiring the use of a jig. For this reason, we offer the High Production Calibration Jig, manufactured locally in Colorado. The jig can also be used with the U125xA models, but is not necessary.